Genium X3 biyonik protez sistemi

Yeni ufuklar keşfetmek

Genium X3 – yeni ufuklar keşfedin

Genium X3 teknoloji, işlevsellik ve sezgisel kullanımın benzersiz bir bileşimdir. Bu protez sistemi, fizyolojik insan yürüşünün, mümkün olan doğala en yakın taklididir.

Genium X3 size yeni olanaklar sunar; sistem suya ve aşınmaya dayanıklı olduğundan protezinizle duş alabilirsiniz, denize girebilirsiniz veya işinizde her tür ortam koşullarında çalışabilirsiniz.

Geri geri yürüme, basamak çıkma, farklı hızlarda ve adım uzunluklarında yürüme; hepsi Genium X3’ün sezgisel ve adaptif özellikleri ile mümkündür. Koşma modu özellikle spor yapmak için geliştirilmiştir. Bu modda kullanıcı yürüyüş ve koşu sporlarını yapabilir. Alt bacağın tam ekstansiyonunu sağlamak için OPG (optimized physiological gait – optimize edilmiş fizyolojik yürüyüş) işlevi bu modda pasif hale getirilir. Genium X3 toplamda 5 değişik moda sahiptir.

Inductive charging

The inductive charger is magnetically attached to the back of the knee joint. It makes charging straightforward, even through clothing or the cosmetic cover.

Tube adapter

Additional sensors are integrated in the tube adapter. They not only measure the ankle moment but also the vertical force acting on the joint. The sensor data help make a natural movement pattern possible.

Battery and electronics

In the Genium X3, the rechargeable battery and electronics are enclosed and protected by the frame and Protector. The integrated microprocessor coordinates all measurement and control processes.

Protector

The Protector withstands severe strain and is resistant to scratching and impacts.

You can choose between two different design versions.

Gyroscope, acceleration sensor and angle sensor

The gyroscope and the acceleration sensor measure the acceleration and position of the Genium X3 in space. The angle sensor determines the flexion angle and flexion angle speed.

Knee moment sensor

The knee moment sensor provides important information for precisely determining the forces acting on the prosthesis.



Benefits at a glance

Waterproof

You can shower, go swimming or work in wet conditions with the Genium X3: Select materials such as titanium, hard anodised aluminium, stainless steel and high-end coatings combined with especially sealed components protect the joint's sensitive sensor technology and electronics. The Genium X3 is waterproof and corrosion-resistant. It opens up previously unimaginable possibilities.

Anında tepki

There are many situations where you need to respond spontaneously: Crossing the street, when a car appears unexpectedly, or when you have children who can always get you into unexpected situations. The Genium X3 responds easily thanks to walk-to-run mode. Switching from walking to running is detected by the electronics within microseconds and the auto-adaptive joint reacts.

Spor yaparken

No matter what you demand from yourself in sports, running mode keeps up. It was developed especially for sports activities. Its functions are adapted to running behaviour and based on the natural model. For example, an increased maximum flexion angle of the knee joint required for running is taken into account.

Günlük kullanıma uygun

Walking slow or fast, climbing stairs step-over-step, crossing obstacles with a natural movement, standing safely on slopes or walking backwards: Thanks to the latest computer, sensor and control technology, the Genium X3 responds intelligently to various everyday situations. It even adapts to different shoe weights and clothing.

Uygun bir ayak

The Triton prosthetic feet are perfect for highly active users. Especially robust, the Triton Heavy Duty has a high load capacity and is resistant to water and corrosion.

Sağlam koruyucu kılıf

In order to withstand the many stresses of everyday life, the Protector made of durable PU material covers the knee joint and stands up to even severe strain easily.

Technology

The best way to walk is with a natural, physiological gait – whether it be during a relaxed stroll through the city or quickly sprinting to the bus. It is exactly this gait that the Genium X3 replicates almost identically, phase for phase. No matter on what surface, no matter at what speed. With the Genium X3, we have bundled this technology under the term "Optimised Physiological Gait" (OPG). It relieves strain on the entire locomotor system, improves wearer comfort and opens up entirely new freedom of movement for the amputee.

1. PreFlex

The knee joint is already pre-flexed when the heel strikes the ground – the way it is with a natural leg. This is automatically controlled by the electronics. You require less force to initiate a step, since the prosthetic foot makes full-surface contact with the ground more quickly.

2. Adaptive yielding control

Intelligent knee flexion control with full-surface contact between the prosthetic foot and the ground is depending on the forces acting on the prosthesis. You can safely negotiate hills, uneven terrain and slopes, need to pay less attention to controlling your prosthesis and are able to use it intuitively. Flexion also dampens the impact of the foot, which decreases compensating movements and therefore significantly reduces subsequent orthopaedic problems as well.

3. Dynamic stability control

This is an innovative and patented method to monitor all movement situations. Six different parameters are continuously recorded in order to define the optimum switching point between the stance and swing phase. For you this translates into enhanced safety, among other things when walking backwards or lunging.

4. Adaptive swing phase control

The quality of the swing phase with the Genium X3 is comparable to the natural model. The lower leg pendulum movement is precisely limited to 65° of flexion – regardless of the walking speed. The increased ground clearance minimises the risk of tripping and falling. Even on slopes, the angle-independent swing phase ensures sufficient ground clearance. There is no limitation of step variance, no matter whether you are taking short or long steps, or walking slow, fast or at irregular speed. The system even adapts intelligently to the respective shoe soles and clothing.

Prosthesis training

A prosthesis is only as good as the user's ability to handle it! The Genium X3 is an innovative knee joint that offers you numerous functions. However, these functions have to be learned and practiced, especially in the beginning. This is the only way you can fully utilise the functionality of the Genium X3.

With "Genium Gait Training", Ottobock has developed a training programme that instructs therapists, technicians and users in detail about conducting efficient gait training. This gait training can be used for the Genium X3 as well. The programme is illustrated with clear videos. Activities which are practiced include walking backwards, going down stairs and negotiating slopes as well as the Genium X3 standing function, sitting, climbing stairs step-over-step and much more. Numerous exercises have been selected to increase safety and confidence early on in using the Genium X3.

Ideal prosthetic components

Triton: The prosthetic feet from the Triton family of products are suitable for active users. They are made of a set of flexible carbon springs. This design allows the foot to function as a flexible unit, which creates a particularly smooth rollover. Notwithstanding the system's ability to move, the Triton feet provide a consistently high level of stability when walking and especially when standing. Furthermore, the foot's special structure ensures a powerful transition to the swing phase and a highly variable stride length. At the same time, the split forefoot section gives the user the necessary control to deal with uneven ground and quick changes of direction. The Triton is extremely well suited for meeting the requirements of an active lifestyle. Thanks to its outstanding dynamic response and flexibility, it supports a broad range of applications from everyday use to recreational sports.

Triton Low Profile: The Triton Low Profile makes the excellent functionality of the Triton available even to users with limited space for the integration of a prosthetic foot.

Triton Heavy Duty: The Triton Heavy Duty is especially strong and robust. It features an adapter made of titanium. Non-corrosive metal parts make the foot water-resistant as well.

Download

Lütfen uygun bir format seçiniz

FAQ